Description

Chlor-Safe is an alternative to traditional chlorine disinfection and is effective without pH control. It is a chlorinated isocyanurate compound for use in the disinfection of wells, storage tanks, and distribution pipelines.

• Safer than liquid chlorine, with no splashing, spills or corrosive fumes

• Removes the need for pH control

• Dissolves quickly, even in cold water

• 55% available chlorine

• Easy to use

• Long shelf life

• NSF certified for potable water well use

View SDS

Application

Chlor-Safe is mixed with potable water in a tank at the surface and the solution is placed in the well and agitated to disinfect the well casing, screen and filter pack.

1. Determine the static volume and the amount of Chlor-Safe. (Consideration should be given to increasing this volume by two to four times to allow sufficient disinfectant solution to reach all areas of the well and borehole that can harbor coliform bacteria or other contaminating organisms.)

2. In a tank on the surface, add the amount of Chlor-Safe to water as estimated from dosage guide.

3. Place the chlorine solution in the well, evenly washing down the upper levels of the well before you place the solution throughout the water column

4. Agitate or surge the mixture to ensure good coverage. Let the solution stand in the well for contact time required per local regulations. Additional agitation before removal is beneficial.

5. Pump the solution to the surface, neutralize using Chlor-Out NW-500, and discharge in accordance with local rules and regulations.