Description

Chlor-Out was designed to rapidly neutralize chlorine solutions following their removal from the well, prior to disposal.

• Used to neutralize chlorine solutions before their disposal

• Safe to handle

• Concentrated crystal that is easy to dissolve for fast neutralization

• Easy to use

View SDS

Application

Chlor-Out acts immediately, reducing down-time and effectively neutralizing chlorine residuals. Most regulations prevent the discharge of chlorinated water. Chlor-Out is used on the surface, after the well or system discharge has been pumped into a tank and neutralized in batches, as follows:

1. Measure the chlorine level in the water, and calculate the dosage of Chlor-Out needed for neutralization, as indicated on the table

2. Mix Chlor-Out with the chlorinated water. The chlorine levels will neutralize almost immediately. If dechlorinating a large volume, dissolve Chlor-Out in 1 gal. of water for every pound of Chlor-Out required. Some heat is generated upon dilution

3. Use test strips or meter to test chlorine levels prior to discharge

4. Discharge to an approved outlet.